The IS10 is a 2-way, full range line array cabinet containing 2x ND10-LM Low-Mid drivers (2x 16 Ω) and an NH4TA2 1.5” exit compression driver (8 Ω). The critically optimized waveguide produces a slightly curved wavefront with a nominal dispersion pattern of 110° x 10° (H x V).  The waveguide’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field.  Patent-pending Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade aluminum and steel, and is equipped with two Speakon™ NL4 connectors (IS10), or barrier strips (IS10b). A plate and screw rigging system is recessed in the interior of the rear rigging fins for easy assembly.

The IS10 is suited to a wide variety of applications. Its full range capability (60 Hz) at reasonable levels qualifies for applications where sub is not required. Increased vertical coverage (10°) enables the IS10 to cover theaters, arenas and stadiums with reasonable speaker quantity. Other target applications include dance clubs, large meeting rooms and contemporary churches.

Frequency Range (+/-3 dB) 60 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 110° x 10°
Maximum Peak SPL** 141.3 dB
Components LF 2 X ND10-LM
Components HF Adamson NH4TA2 4” Diaphragm / 1.5” Exit Compression Driver
Nominal Impedance LF 8 Ω
Nominal Impedance HF 8 Ω
Power Handling (AES / Peak) LF 700 / 2800 W
Power Handling (AES / Peak) HF 160 / 640 W

Integrated Rigging System

Connection 2x Speakon™ NL4 or Barrier Strips / IP67 Cable Gland with Weatherized
Height Front (mm / in) 300 / 11.8
Height Back (mm / in) 175 / 6.9
Width (mm / in) 737 / 29
Depth (mm / in) 518 / 20.4
Weight (kg / lbs) 25 / 55.2
Supported Processing Lake

**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification

IS10 IS10 & IS119 Support Frame (930-0028) Suspension, transition and stacking frame for IS10 & IS119 enclosures
IS10 Extended Beam (930-0021) Extension beam for larger angles and frame linking
IS10 Moving Point Extended Beam (930-0033) Extension beam with continuously adjustable pick point
IS10 IS10 Micro Frame (930-0030) Suspension frame to hang up to 4x IS10
IS10 Line Array H-Clamp (932-0047) Horizontal articulator clamp to be used with CS-Series/S-Series/IS-Series line array rigging frames (max load: 200 kg)
IS10 Extended Lifting Plates (932-0043) Lifting plates with fine resolution pick points for single point hangs (2 per set)
IS10 Spec Sheet One page spec sheet for the IS10 n/a
IS10 User Manual Comprehensive User Manual for the IS10 n/a
IS-Series Line Array Rigging Manual Comprehensive User Manual for IS-Series Line Array Rigging Accessories n/a
IS-Series Brochure Product brochure for Adamson's IS-Series n/a
Sketchup Library Sketchup Models of all IS-Series enclosures and rigging accessories n/a
3D CAD Drawings 3D CAD drawings of the IS-Series enclosures n/a
Revit Model Library Revit Models of the IS10 enclosure and accessories n/a
Adamson Amplification Chart V5.4 Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. n/a
Adamson Load Library V5.4 Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher n/a
ADAMSON EASE Data V17 Complete GLL library for all Adamson products n/a


Get in Touch