IS7p

The IS7p is a 2-way, full range point source cabinet containing 2x ND7-16 Low-Mid drivers (2x 16 Ω) and an NH3-8 1.4” exit compression driver (8 Ω). The prolate spheroidal waveguide produces a nominal dispersion pattern of 70° x 40° or 100° x 50° (H x V), rotatable in 90° increments.  The design of the waveguide ensures equal tonal balance when moving outside of the intended coverage pattern, delivering natural sound with no diffraction or lobing.

The cabinet construction uses marine grade birch plywood as well as aircraft grade aluminum and steel, and is equipped with two Speakon™ NL4 connectors (IS7p), or barrier strips (IS7pb). A plate and screw rigging system is placed on four faces of the enclosure, with a multitude of accessories allowing the enclosure to be deployed seamlessly in a variety of applications.

The IS7p is suited to a wide variety of applications. Its full range capability (80 Hz) at reasonable levels qualifies for applications where sub is not required. The choice in dispersion pattern enables the IS7p to supplement larger systems as a fill cabinet, or to handle smaller applications on its own. Other target applications include performing arts centers, live performance venues, sports venues, conference centers and houses of worship.

Frequency Range (+/-3 dB) 80 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 70° x 40° or 100° x 50° Rotatable
Maximum Peak SPL** 136.5 dB
Components LF 2 X ND7-LM16
Components HF Adamson NH3-8 3” Diaphragm / 1.4” Exit Compression Driver
Nominal Impedance LF 8 Ω (2x 16 Ω)
Nominal Impedance HF 8 Ω
Power Handling (AES / Peak) LF 500 / 2000 W
Power Handling (AES / Peak) HF 110 / 440 W
Rigging

Integrated Rigging System

Connection 2x Speakon™ NL4 or Barrier Strips / IP67 Cable Gland with Weatherized
Height Front (mm / in) 527 / 20.75
Width (mm / in) 251.5 / 9.9
Depth (mm / in) 356 / 14
Weight (kg / lbs) 15 / 33.1
Supported Processing Lake

**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification

IS7p IS7p Horizontal Bracket (934-0027) IS7p horizontal yoke
IS7p IS7p Vertical Bracket (934-0028) IS7p vertical yoke
IS7p IS-Series Tilt Adapter (932-0042) Adapter bar with multiple tilt angles for IS-Series Horizontal and Vertical Brackets (934-0027, 934-0028, 934-0029, 934-0030)
IS7p IS7p Short Fill Plate (930-0032) Very low profile surface mount plates to affix to the IS7p (set of 2)
IS7p IS7p & IS10p Fill Plate (930-0031) Low profile surface mount plates to affix to the IS7p / IS10p (set of 2)
IS7p IS-Series Sight Mount (934-0026) Circular disk with multiple angle bar for IS10p / IS7p
IS7p IS-Series Super Sight Mount (934-0031) Lifting hardware to attach IS10p or IS7p Horizontal Brackets
IS7p IS-Series Articulator (934-0032) Multiple angle articulator to attach 2x IS10p or IS7p Horizontal Brackets
IS7p IS-Series C-Clamp (932-0040) Beam clamp for IS10p / IS7p, mounts directly to enclosure with 90 degree angle increments (max load: 200 kg)
IS7p IS-Series Point H-Clamp (932-0041) Beam clamp for IS10p / IS7p, mounts directly to enclosure with 5 degree angle increments (max load: 200 kg)
IS7p IS-Series Pole Mount Adapter (932-0039) Circular disk with polemount cup to fit standard speaker stand, used with IS10p / IS7p
IS7p Spec Sheet One page spec sheet for the IS7p n/a
IS7p User Manual Comprehensive User Manual for the IS7p n/a
IS-Series Brochure Product brochure for Adamson's IS-Series n/a
Sketchup Library Sketchup Models of all IS-Series enclosures and rigging accessories n/a
3D CAD Drawings 3D CAD drawings of all IS-Series Point enclosures and rigging accessories n/a
Revit Model Library Revit Models of the IS7p enclosure and accessories n/a
Adamson Amplification Chart V5.4 Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. n/a
Adamson Load Library V5.4 Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher n/a
ADAMSON EASE Data V17 Complete GLL library for all Adamson products n/a
IS7p

WANT TO WORK WITH ADAMSON PRODUCTS?

Get in Touch