The S10n is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium drivers (2x 16 Ω) and an NH4TA2 1.5” exit compression driver (8 Ω). The critically optimized waveguide produces a slightly curved wavefront with a nominal dispersion pattern of 80° x 10° (H x V). The waveguide’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field. Patent-pending Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two Speakon™ NL8 connectors. The rigging system incorporates the best aspects of previous advancements in our new SlideLock rigging technology. 

The S10n is suited to a wide variety of applications. Its full range capability (60 Hz) at reasonable levels qualifies for applications where sub is not required. Increased vertical coverage (10°) enables the S10 to cover theaters, arenas and stadiums with reasonable speaker quantity. The S10n's narrower horizontal pattern allows for not only increased usability in reflective spaces, but also increases the long-throw capability of an S-Series package. Other target applications include dance clubs, medium size festivals, corporate events and contemporary churches.

Frequency Range (+/-3 dB) 60 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 80° x 10°
Maximum Peak SPL** 141.3 dB
Components LF 2x ND10-LM 10" Kevlar® Neodymium Driver
Components HF 1x NH4TA2 4" Diaphragm / 1.5" Exit Compression Driver
Nominal Impedance LF 8 Ω
Nominal Impedance HF 8 Ω
Power Handling (AES / Peak) LF 2x 350 / 2x 1400 W
Power Handling (AES / Peak) HF 160 / 640 W

Slidelock Rigging System

Connection 2x Speakon™ NL8
Height Front (mm / in) 265 / 10.4
Height Back (mm / in) 178 / 7
Width (mm / in) 737 / 29
Depth (mm / in) 526 / 20.7
Weight (kg / lbs) 27 / 59.6
Supported Processing Lake

**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification

S10n Sub-Compact Support Frame (930-0020) Support frame for S10, CS10, S10n, CS10n, S119 & CS119 enclosures
S10n Extended Beam (930-0021) Accommodates greater array articulation
S10n Moving Point Extended Beam (930-0033) Extension beam with continuously adjustable pick point
S10n Line Array H-Clamp (932-0047) Rigging: horizontal articulator clamp to be used with S-Series/CS-Series/IS-Series line array rigging frames (max load: 200 kg)
S10n Extended Lifting Plates (932-0043) Rigging: Lifting plates with fine resolution pick points for single point hangs (2 per set)
S10n Sub-Compact Line Array Dolly (938-0019) Transports up to 4x S10, CS10, S10n, CS10n enclosures.
S10n Dolly Stacking Legs (938-0014) The Dolly Stacking Legs allow for your E-Series, S10, S10n, CS10 or CS10n system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application.
S10n Sub-Compact Line Array Cover 4up (907-0026) Cover for 4x S10, CS10, S10n or CS10n stacked on a Sub-Compact Line Array Dolly (part no. 938-0019)
S10n Sub-Compact Line Array Flight Case (901-0003) Road-ready Flight Case for 4x S10, CS10, S10n or CS10n. 31.25" x 25" x 50"
S10n Sub-Compact Underhang Adapter Kit (931-0010) Suspends S10/S10n/CS10/CS10n enclosures with the use of the Sub-Compact Support Frame (part no. 930-0020) from E-Series 3-way line source enclosures
S10n Spec Sheet One page spec sheet for the S10n n/a
S10n User Manual Comprehensive User Manual for the S10n n/a
S-Series User Manual Product and Rigging Manual for the S10 & S119 n/a
S-Series Configuration Brochure A document outlining the factory recommended configurations for the S-Series n/a
3D Cad Drawings 3D CAD drawings of all S-Series enclosures n/a
ADAMSON EASE Data V17 Complete GLL library for all Adamson products n/a
Adamson Amplification Chart V5.4 Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. n/a
Adamson Load Library V5.4 Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher n/a


Get in Touch